XUS 037 - Exhaust Duct with Clamps


4 inch x 10 feet Exhaust Duct is ideal for connecting a laser to an exhaust fan or to a metal duct. It is sized perfectly to slide over the 4 inch exhaust port on laser systems. The smooth walled duct is easily cut to length using a fine bladed saw.

The Exhaust Duct is flexible and helps to isolate vibration and noise from the exhaust fan. Two 4 inch clamps are included to secure the duct. The clamps tighten easily with a screwdriver.

Click here to view the Exhaust Fan TechTip.

Note: Do not use plastic ‘dryer vent’ hose as an exhaust duct for your laser. This type of coil hose design will reduce air flow and may collapse under the pressure.

Add to Cart:

  • Model: XUS 037

Copyright © 2014 LaserBits, Inc.. All Rights Reserved.