Skip to Main Content »

1-800-733-7705

Welcome to LaserBits - Wholesale Laser Materials and Training.

Your Shopping cart is empty.

Laser Settings

  LaserU Settings Calculator App Get your aop on Google Play
  The LaserU settings calculator will help you get the correct settings for engraving and cutting a multitude of substrates. Get the app today for your Apple or Android device! Get your app in the Apple Store

 

LaserBits has provided some baseline settings for engraving and cutting various materials. Today’s advanced laser systems provide crisp, clean quality and offer a consistency that is extraordinary. However, each laser tube output varies slightly so the settings shown may need adjustment for your system. Clean laser optics also makes a difference in the transmitted laser energy. Take the time to maintain the lens and mirrors on your system to obtain repeatability.

When adjusting settings, a good rule is to adjust either the power or the speed. Having less variables will help to find the optimum settings faster. Also, keep the power setting as low as possible. Power settings that are too high can melt and distort many materials. All settings noted use the default resolution which is 500 or 600 depending on the make of your laser system.

A special note when using CerMark Metal Marking Solution: not all metals use the same speed setting. Metals that are thick will require more heat energy and a slower speed setting. Softer metals like aluminum and pewter also require more heat energy and a slower engraving speed setting. If the engraving washes off, slow the speed setting until the engraving bonds to the metal.

 

 
Basic Laser Engraving Settings
Substrate 35 Watt System 50 Watt System
Power Speed Power Speed
Acrylic - Cast Awards & Sheets 45  100 35  100
Acrylic - Painted & MIrrored Sheets 50 100 40  100
AlumaMark 35 70 25 100
Anodized Aluminum 70 100 60  100
CerMark Metal  100 30  100 40
CerMark Tile 100  24 100 35
CerMark Tape  100 5  100 10
Delrin  100 30  100 40
DuraBlack  75 100 85 100
Glass & Crystal 100 30 100 40
Granite 45 100 55 100
Leather 35 100 25 100
LaserFlex 70 100 60 100
Marble 75 80 55 80
Plastic Laminates (LaserLIGHTS/FlexiBrass) 35 100 25 100
Plastic Laminates (LaserMax/LASERmag) 40 100 30 100
Rubber - Low Odor 100 20 100 35
Rubber - No Odor 100 35 100 45
Klikit Silicone Bands 100 50 100 60
Wood - Alder 100 65 100 75
Laser Wood Laminates .20" 100 65 100 75
Laser Wood Laminates 1/8" 100 65 100 75
 

 

 

 
Basic Laser Cutting Settings
Substrate 35 Watt System 50 Watt System
Power Speed Power Speed
Acrylic (Cast/Extruded) 1/16" 100 7 100 16
Acrylic (Cast/Extruded) 1/8" 100 10 100 20
Acrylic (Mirror Sheets) 1/8" 100 7 100 16
Delrin 100 10 100 15
LaserFlex 40 20 35 20
Laser Foils 5 20 3 20
Leather - 1/8" 45 20 55 20
Polyester Stencil 20 20 10 20
Plastic Laminates (LaserLIGHTS/FlexiBrass) 30 20 22 20
Plastic Laminates (LaserMax/LASERmag) 45 20 35 20
Rubber - Low Odor 100 10 100 15
Rubber - No Odor 100 15 100 18
Shell Laminate 25 20 18 20
Wood - Alder 1/8" 100 15 100 20
Wood - Alder 1/4" 100 10 100 15
Wood Thins 100 10 100 15
Wood Laminates .20" 100 10 100 15
Wood Laminates 1/8" 100 8 100 15
 

 

   Click here to subscribe to LaserU!